Coating Functions

Ceramic Oxide Coatings

Tungsten Carbide Coatings

Chromium Carbide and other Coatings

Iron, Nickel and Cobalt-based Coatings

Dimensional Restoration (Part salvage, area buildup)

Chemical Corrosion Resistance

Adhesive Wear:
Soft & Hard Bearing Coatings

Abrasive Wear:
Coatings Resistant to Abrasive Grains (Low & High temperature)
Coatings Resistant to Hard surfaces (Low & High temperature)
Coatings Resistant to Fiber and Thread
Coatings Resistant to Hard Surfaces (High temperature)

Surface Fatigue Wear:
Coatings Resistant to Cavitation
Coatings Resistant to Fretting (Intended motion)
Coatings Resistant to Fretting (No Intended motion-Low & High temperature)

Erosive Wear:
Coatings Resistant to Particle Erosion (Low & High temperature)
Heat and Oxidation Resistance

High Temperature Processes:
Coatings Resistant to Oxidizing Atmospheres
Coatings Resistant to Corrosive Gases
Coatings Resistant to Erosion Above 1550F
Coatings for Thermal Barriers

Molten Metal Handling:
Coatings Resistant to Molten Zinc
Coatings Resistant to Molten Aluminum
Coatings Resistant to Molten Iron and Steel
Coatings Resistant to Molten Copper
Atmosphere and Immersion Corrosion Resistance

Atmospheric Corrosion:
Coatings Resistant to Industrial Atmospheres
Coatings Resistant to Salt Atmospheres
Coatings Resistant to Rural Atmospheres

Immersion Corrosion:
Coatings Resistant to Potable Fresh Water
Coatings Resistant to Non-Potable Fresh Water
Coatings Resistant to Hot Fresh Water
Coatings Resistant to Salt Water
Coatings Resistant to Corrosion in Chemical & Food Processing

Electrical Conductivity or Resistance

Abrasive Coatings – rough surface

Coatings for Radio Frequency Shielding

Ferrous Substrates:
Coatings for Machinable Carbon Steels
Coatings for Grindable Carbon Steels
Coatings for Machinable Corrosion-Resistant Steels
Coatings for Grindable Corrosion-Resistant Steels

Non Ferrous Substrates:
Coatings for Nickel and Nickel Alloys
Coatings for Cobalt and Cobalt Alloys
Coatings for Copper and Copper Alloys
Coatings for Aluminum and Magnesium and their Alloys
Abradable Coatings